Krenn new products
Electric Flush Steel Saw	Electro-hydraulic Steel Cutter – battery powered	Electro-hydraulic Wire rope and Cable Cutters	Electro-hydraulic Bending Tool – battery powered
KX - Hydraulic Steel Cutters	Hydraulic Material Testing Presses
Stationary Steel Cutters KBS-32	Stationary Steel Cutters KBS-44 N	Pneumatic Steel Strapping Cutter KRC 8L-S	Electro-hydraulic Steel Cutter KPC-12 ACL – Battery Powered

Electric Flush Steel Saw

Fast cuts, safe use and convenient design: Ideal for flush and free cutting of round steel, profiles and tubes for diameters of 10 mm up to a maximum of 20 mm Ø. The material is cut with very few flying sparks.

KFD-20 E

Cutting Capacity	10 mm – 20 mm Ø
RPM	1,650 r/min
Power	230 V ~ 50 Hz
Rated Output	1,050 W
Weight	3.4 kg
Dimensions	450 x 140 x 100 mm

• Safe cutting
  - Virtually no sparks
  - Flush cut with no burrs
  - Cold cut
• Efficient cutting
  - Fast cut
  - High degree of durability
• Compact and easy to handle design
  - Weighs only 3.4 kg
  - Grips can be placed in three different positions
  - Grip can be rotated 180°

Electro-hydraulic Steel Cutter – battery powered

OS-13 ACNL/Battery

Cutting Capacity	max. 13 mm Ø
Cutting Speed	2.5 sec
Weight	4,7 kg
Motor	18 V
Battery	Lithium ions
Voltage	18 V
Dimensions	331 x 262 x 99 mm

• Has a cutting time of 2.5 seconds, the fastest battery driven bolt cutter up to 13 mm Ø
• Lithium ion battery
• Cutting head rotatable by 360°
• Cuts per battery charge
  - for 10 mm Ø approx. 250 cuts
  - for 13 mm Ø approx. 125 cuts
• Light, easy to handle, compact

OS-16 ACBL/Battery

• Safe and spark-free cutting of steel bars, wire and
  reinforcing steel up to 16 mm diameter
• Brushless 18 volt motor – runs cooler and more
  efficiently for a longer service life of the motor
  and improved battery life
• Replacement of the carbon brushes no longer needed
• Rapid and effortless cutting – cutting time approx. 2.8 seconds
• Four-edged reversible blade – economic
• Cutting head can be rotated 360°, for optimum cutting position
• Adjustable stop
• Ergonomic pistol grip with rubberised handle
  for safe and comfortable working

Cutting Capacity	max. 16 mm Ø
Cutting Speed	approx. 2,8 sec
Motor	18 V (brushless)
Battery	Lithium-Ionen
Voltage/Power	18 V / 5,0 Ah
Weight	6.9 kg
Dimensions	360 x 275 x 108 mm
Art.-No.:	CE 446

Scope of delivery:

• 18 V lithium ion battery / 5.0 Ah with LED state of charge display
• Rapid charger (charging time 5.0 Ah battery: approx. 45 min.)
• Transport case, hydraulic oil, hex key set (4 x),
  open-ended wrench 17 – 14

OS-19 ACBL/Battery

• Safe and spark-free cutting of steel bars, wire and

  reinforcing steel up to 20 mm diameter
• Brushless 18 volt motor – runs cooler and more

  efficiently for a longer service life of the motor

  and improved battery life
• Replacement of the carbon brushes no longer needed
• Rapid and effortless cutting – cutting time approx. 4.5 seconds
• Four-edged reversible blade – economic
• Cutting head can be rotated 360°, for optimum cutting position
• Continuously adjustable stop for optimum cutting at 90° angle
• Ergonomic pistol grip with rubberised handle for safe and comfortable working
• Additional handle for ergonomic cutting

Cutting Capacity	max. 20 mm Ø
Cutting Speed	approx. 4.5 sec
Weight	10.9 kg
Motor	18 V (brushless)
Battery (voltage/power)	Lithium ion (18 V / 5.0 Ah)
Dimensions	387 x 301 x 132 mm
Art.-No.:	CE 457

Scope of delivery:

• 18 V lithium ion battery / 5.0 Ah with LED state of charge display
• Rapid charger (charging time 5.0 Ah battery: approx. 45 min.)
• Transport case, hydraulic oil, hex key set (4 x),
  open-ended wrench 17 – 14

Electro-hydraulic Wire rope and Cable Cutters

For the efficient, safe and ergonomic cutting of wire ropes and cables

KRG-Serie

Model	KRG-32 TE	KRG-55 TE
Cutting Capacity	max. 32 mm Ø	max. 55 mm Ø
Cutting Force	18 t	31 t
Working Pressure	550 bar	550 bar
Electric Motor	1,200W/240V	1,200W/240V
Weight	15.2 kg	24.3 kg
Dimensions	560 x 185 x 240 mm	600 x 185 x 240 mm

• Safe and efficient cutting without great effort or generating sparks
• Sturdy cutter head, special hardened blades
• Double-acting hydraulic (no blocking)
• Powerful electric motor
• Cuts wire ropes and cables up to 55 mm Ø, depending on the quality of the material

Electro-hydraulic Bending Tool – battery powered

KMU-16 P ACNL/Battery

Bending Performance	max. 16 mm Ø
Weight	10.7 kg
Battery	Lithium ions
Voltage	18 V
Bending Force	10 t
Dimensions	560 x 125 x 370 mm

• For bending the wire ends in the coil up to 16 mm Ø
• For the safe and efficient bending of rebar or wire up to 16 mm Ø
• With a lithium ion battery

KX - Hydraulic Steel Cutters and Straighteners

KX - Steel Cutter

For the safe and effortless cutting of wire and bars with a maximum
diameter of 50 mm – highly robust and durable

KRENN model no.	KRENN article no.	Cutting capacity	Weight	Cutting force	Operating pressure
SK 15	KS0028	max. 15 mm Ø	6.0 kg	150 kN	600 bar
SK 22	KS0033	max. 22 mm Ø	12.5 kg	280 kN	600 bar
SK 28	KS0037	max. 28 mm Ø	17.0 kg	400 kN	600 bar
SK 42	KS0039	max. 42 mm Ø	27.5 kg	490 kN	600 bar
SK 50	KS0047	max. 50 mm Ø	122.0 kg	1,250 kN	600 bar
GS 22	KS0079	max. 16 mm Ø	12.5 kg	280 kN	600 bar
GS 42	KS0071	max. 28 mm Ø	27.5 kg	490 kN	600 bar

SK = shearing blade, GS = straight cut (facing cut with die blades)

SK 22 (with rearward-facing grip)

GS 42 GS Series with die blades for a flush, burr-free cut

• With optional mount including rotating tool holder with 180° rotation in both directions, lockable in any position
• With optional rearward-facing grip
• Cutting head SK 50 available in a milled or cast design

KX - Straighteners

For the safe and effortless straightening of wire and bars with a maximum
diameter of 42 mm – highly robust and durable

KRENN model no.	KRENN article no.	Straightening performance	Weight	Piston pressure	Operating pressure
RK 20	KS0042	max. 22 mm Ø	7.7 kg	150 kN	600 bar
RK 26	KS0113	max. 32 mm Ø	19.0 kg	280 kN	600 bar
RK 40	KS0109	max. 42 mm Ø	26.0 kg	400 kN	600 bar

• With optional mount including rotating tool holder with 180° rotation in both directions, lockable in any position
• With optional rearward-facing grip
• RK 26 with mount including rotating tool holder and rearward-facing grip

KX - Hydraulic Drive Units

For driving KX - Steel Cutters and KX - Straighteners

KRENN model no.	KRENN article no.	Power supply	Flow rate	Tank volume	Operating pressure
T5 - R4.2	KS6110	3 x 400 V	4.2 l/min	30 l	max. 600 bar
T6 - R4.2 - R4.2	KS6111	3 x 400 V	2 x 4.2 l/min	30 l	max. 600 bar
R 3.7	KP0042	3 x 400 V	3.7 l/min	20 l	max. 600 bar
R 4.2 B50	KS0082	3 x 400 V	4.2 l/min	50 l	max. 600 bar
R 4.2 - 4.2 B50	KS0083	3 x 400 V	2 x 4.2 l/min	50 l	max. 600 bar
R 7.4	KP0121	3 x 400 V	7.4 l/min	80 l	max. 600 bar

• Drive units T6 - R4.2 - R4.2 and R 4.2 - 4.2 B50 for operating two devices simultaneously
• Cart for drive units available on request

Hydraulic Material Testing Presses

Hydraulic upsetting presses for the material testing of wire with a piston pressure of 500 to 5,000 kN. These are optimally suited for the compression testing of wire samples with a maximum diameter of 45 mm and are also available as a double press with integrated cutting device.


Upsetting function:
The compression height can be modified and the test standard adjusted as required. Rolling and annealing defects can be detected in the sample thanks to the classic formation of cracks. Fitted with a protective device in the event of breakage of the test sample or the tool.

Cutting function:
Using the cutting device, the samples can be precisely cut to the required length. The sample is cast without burr and with an even shear plane. Cutting blades are selected on the basis of the wire diameter.

• Special designs available on request
• Devices for notching, breaking and bending

Stationary Steel Cutters KBS-32

The electro-mechanical stationary steel cutter for an effortless, safe and efficient way of cutting of concrete steel rods up to a Ø of 26 mm. a safe and efficient way of cutting without effort and flying sparks high cutting speed appropriate for continuous operation solid and durable blades made of tempered tool-steel powerful electric motor, solid and long-life mechanism

KBS-32

Max. cutting capacity (650 N/mm2)	1 rod 26 mm Ø 2 rods 18 mm Ø 3 rods 16 mm Ø
Cutting speed	approx. 1,0 sec
R.p.m.	107 r/min
Motor capacity	2.200 W
Voltage	400 V 50 Hz, 3-phase-AC
Weight	254 kb
Dimensions	800 x 570 x 750 mm
Art.-No.:	CMC32

Stationary Steel Cutters KBS-44 N

The electro-mechanical concrete steel shear for an effortless, safe and efficient way of cutting of concrete steel rods up to a Ø of 34 mm. a safe and efficient way of cutting without effort and flying sparks high cutting speed appropriate for continuous operation solid and durable blades made of tempered tool-steel a powerful electric motor, solid and long-life mechanism a very stable construction made of cast iron, gearing mechanism of carbide metal The automatically operated lubrication pump provides an optimal distribution of grease.

KBS-44 N

Max. cutting capacity (650 N/mm2)	1 rod 34 mm Ø 2 rods 28 mm Ø 3 rods 22 mm Ø
Cutting speed	approx. 1,5 sec
R.p.m.	40 r/min
Motor capacity	4.000 W
Voltage	400 V 50 Hz, 3-phase-AC
Weight	400 kg
Dimensions	980 x 560 x 770 mm
Art.-No.:	CMC44

Pneumatic Steel Strapping Cutter KRC 8L-S

For a safe and effortless cutting of tensional steel strappings Safe and quick: Practical experience has shown: particularly whenever ten­sional steel strappings need to be cut there is an increased risk of injury. The solution offered by KRENN: The pneumatic steel strap­ping cutter KRC 8L-­S, ideal for a safe and effortless cutting/ opening of tensional steel strappings holding the wire coil. The steel strapping cutter KRC 8­S – available in three different versions as to its length – is ideal for opening the coil at a high safety distance for the user.

KRC 8L-S

Cutting Capacity	Strap width up to 51 mm, thickness 1.2 mm
Cutting Speed	1.0 sec
Weight	8.3 kg
Operating Pressure	7 bar
Air Consumption	ca. 7,0 l
Cutting blades	replaceable
Dimensions	1,008 x 245 x 253 mm
Art.-No.:	BB743

• high safety distance
• with safety retention
• for a safe and effortless cutting of steel
  strappings up to a max. width of 51 mm
  and a thickness of 1,2 mm
• high cutting speed
• easy-to-handle

Electro-hydraulic Steel Cutter KPC-12 ACL – Battery Powered

For an effortless and safe cutting of wire under constricted room conditions A slender cutting head – powerful tool: The electro-hydraulic steel cutter KPC-12 ACL – due to its powerful lithium-ion battery – is always ready for use. It stands out for its small, slender cutting head which is ideal to reach areas or spots hard to access, ideal, for example, to repair malfunctions inside of a machine (e. g. spinner of straightening system). Depending on the material’s hardness it is able to cut diameters up to 12 mm. When being operated, it works according to the technical principles of a usual bolt cutter.

KPC-12 ACL

Cutting Capacity	max. 12 mm Ø
Cutting Force	7 t
Cutting Speed	3.0 sec
Weight	7.1 kg
Electric Motor (Voltage/Output)	18 V / 400 W
Battery (Voltage/Charging Cap.)	Lithium-ions (18 V / 4.0 Ah)
Dimensions	449 x 107 x 317 mm
Art.-No.:	CE 392

The Extra Slender One A particularly small and slender cutting head, ideal for cutting operations under constricted room conditions		up to max. 12 mm Ø depending on the material’s hardness cuts constructional steel, wire, locks, bolts, etc. a small, slender cutting head compact, quick and easy to handle a cutting head similar to a bolt cutter always ready for use due to lithium-ion battery replaceable cutting jaws